Electrical Panel Inspection

Electrical Panel Inspection

The electrical panel is an essential feature of any commercial building and is responsible for delivering and regulating electricity to a wide range of machines and equipment safely and efficiently. It’s one thing to know that the current situation is under control, but preparing for the addition of new facilities and increased electricity loads is another altogether. Therefore, an electrical panel inspection is an essential assignment for any company wanting to revamp or upgrade its workspaces.

What Is An Electrical Panel Assessment?

An electrical panel assessment, otherwise known as an electrical panel inspection, is a service that – unsurprisingly – focuses on testing the electrical panel board that may be located in the basement, electrical room, or fuse box outside the commercial property. However, rather than inspecting it for potential breaker faults in relation to the existing setup, it is a precautionary measure that is utilized ahead of adding new electrical equipment and facilities.

The on-site inspection should be conducted by a professional who can complete a full and thorough assessment in a minimally invasive manner. This includes;

  • Conducting a full load analysis to determine how much power and energy is currently consumed by the commercial property.
  • Communicating with you to gain a clear idea of the equipment and machines that you may wish to add to the commercial setting.
  • Confirming the capabilities of the electrical panel and, if needed, devising and implementing a strategy to handle the increased power consumption.

In essence, the electrical panel assessment is a procedure that enables you to analyze whether the workplace building is ready to satisfy the increased electrical demands. If it’s not, the insight gained from the process will highlight the best course of action.

Why Do You Need An Electrical Panel Inspection?

As with any business process, every entrepreneur should confirm its value before committing to the task. On the face of it, an electrical panel inspection may seem like an unnecessary assignment that only delays the process of adding new tech facilities. On the contrary, though, it is a precautionary measure that delivers a wide range of benefits for owners, employees, and the company as a whole. Some of the most telling incentives include;

  • Prevent the threat of overloading the electrical panel, which could cause overheating, power trips, and electrical fires.
  • Avoid any potential danger in relation to causing data loss or corruption due to insufficient or unreliable power supplies.
  • Ensure that the commercial building’s electrical setup complies with the local, state, and national regulations and rulings.
  • Gain peace of mind by knowing that your electrical panel is ready to handle the increased demands that are set to follow.
  • Combine the assessment with an electrical panel board inspection that can identify minor breaker faults that need treating sooner rather than later.

It’s not necessary to conduct an electrical panel assessment each time you make a technological change. For example, replacing an outdated computer in the office reception with a newer model is unlikely to put any additional strain on the electrical panel board. However, whenever a significant upgrade is planned, the inspection should be considered non-negotiable.

The relatively short procedure could prevent a range of logistical and financial headaches further down the line. For the sake of your time, budget, and sanity, it’s essential to give this process the attention it deserves.

How Are Electrical Panel Inspections Conducted?

When an electrical panel assessment is deemed necessary, it’s always a good idea to familiarize yourself with the basic features, even if you plan to use a professional electrical technician as advised. The load analysis process is completed with the use of a device known as a load analyzer. The electrical device measures the power levels on single- to 3-phase 4-wire circuits safely and accurately to determine the capacity and reliability of the electricity supply.

Measuring a wide range of signals from 90V to 780V, the device records and displays the data as a graph, establishing defined values for the maximum, minimum and average values. Other key attributes of the process include;

  • The load analyzer does not cause disruption to the service or require you to temporarily shut the workplace down.
  • Once set up, the data can be captured almost immediately, although the electrician will want to monitor the situation for several minutes to gain accurate diagnostics.
  • As well as the primary panel board, the inspection should extend to any secondary fuse boxes that will be impacted by the increased power needs.

The on-site inspection does not necessarily require the surveyor to view all of the workspaces. In fact, it may be possible to analyze the electricity supply and future demands from the basement or wherever the panel board is located. However, you should be prepared for inspections of all working environments as a precaution.

What Happens After The Electrical Panel Assessment?

Once the electrical specialist has recorded and reviewed the electrical panel data, the next stage is to turn this data-driven insight into a calculated decision on what action should be taken next. If the electrical panel already receives a sufficient amount of electricity to satisfy the anticipated increase (and leaves a little breathing space), it’s possible to go ahead with the proposed tech upgrades immediately.

When the electrical panel assessment shows that the building will struggle to meet the increased electricity demands, any of the following steps are possible;

  • The installation of a new electrical panel board, especially if the existing unit is from an outdated manufacturer such as Zinsco, Federal Pacific Electric, or Pushmatic & Challenger.
  • Additional installations of secondary panel boards to distribute electricity currents throughout the building while avoiding overloading any single fuse box.
  • Alterations to the current set up, ranging from the addition of new power supplies and generators to installing energy-efficient machinery within the workspaces.

When your commercial buildings require a little extra attention, it’s pivotal that the right choices are made. The insights gained from the electrical panel assessment allow the professional to identify and implement the best modifications to ensure that the company is prepared for the increased electrical requirements.

Who Needs An Electrical Panel Assessment?

Electrical panel assessments are available to any building that receives an electricity supply via an electrical panel board, including residential properties. In reality, though, the need to check suitability is only needed when the building consumes a large volume of electricity. In the modern business climate, every commercial setting from warehouses to offices or showrooms to manufacturing factories must consider the electrical panel inspection whenever they plan to update their tech systems.

The electricity demands of a workplace may change due to replacing outdated facilities, adding major security systems, or deciding to complete more processes in-house. Additional situations in which the electrical panel may require an assessment include;

  • Company properties have expanded, placing a greater strain on the electrical panel, meaning a better system or secondary panel is required.
  • The building is particularly old and had it’s electrical panel installed at a time when the electrical consumption levels were far smaller.
  • You have noticed power outages or other disruptions to the service, ensuring that any additions could push you over the edge.
  • You want to add Electrical Vehicle (EV) chargers or similar items that were not previously required.

If you haven’t upgraded the facilities in several years, it’s likely that the electrical panel assessment will shine a light on the potential to improve the efficiency and reliability of your electricity supply. Even when this isn’t the case, mental reassurance is a key attribute.

What Happens If You Ignore The Electrical Panel Assessment?

The electrical panel inspection isn’t a legal requirement. Likewise, if your current facilities are in good health, it’s possible that you could ignore this assignment and avoid any negative repercussions. Sadly, the vast majority of upgrades require some preparation with regard to the electricity supply. Failure to meet those needs can lead to an extensive range of problems, including but not limited to;

  • Breaking the compliance regulations, resulting in direct consequences as well as damaged reputations that are hard to rebuild.
  • Downtime caused by power outages, which can cause over $100,000 per hour, depending on the nature of the venture.
  • Time wastage that stems from trying to find and implement solutions to perceived external issues that don’t really exist.

Essentially, your failure to complete the electrical panel assessment will bring negativity to your business through immediate and long-term issues. Whether this causes direct losses or indirect troubles, it will hit your bottom line. Given the challenges facing modern businesses on a day-to-day basis across other company elements, now is the time to ensure that any potential hiccups caused by electrical demands are successfully navigated.

Booking An Electrical Panel Inspection

Before making an electrical upgrade or transformation to the commercial premises, it’s imperative that an electrical panel inspection is used to confirm suitability and put any concerns to bed. When added to the advice that an expert can offer in relation to your planned electrical equipment additions and increased power demands, the value of completing this process ASAP could not be higher. Regardless of what stage your planning is at, get in touch today to book your electrical panel assessment.

Contact Us